East-coast-supercharging ECS Alky C5 User Manual download pdf (Page 4)

2) Pump mounting

Before mounting the pump, install the brass 90 degree fitting on the inlet of the pump,

use the larger of the two fittings provided. The top of the pump will be marked with an

arrow indicating flow direction. Next install the smaller 90 degree brass fitting on the

outlet of the pump. Careful when tightening these fittings as the housing on the pump

can break. Rule of thumb, tighten by hand then one full turn. The mounting location

for the pump will be in the wheel well behind the drivers side front tire. Use the

supplied 4 self tapping screws to attach pump, if drilling into chassis metal, attach o-

ring to one of the bolts before its drilled into place. This will ground it. Now install the

short 18 inch feed hose. Next, on the outlet attach 32 inch section of hose. Pump is to

be mounted with its head pointing down to the ground so access to adjustment screw

can latter be made if needed.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

East-coast-supercharging ECS Alky C5 User Manual Page 4